Department Of Transportation

Anthropomorphic Test Devices; Hybrid III Test Dummy, ES-2re Side Impact Crash Test Dummy

February 5, 2010 - 75 FR 5931 - RIN: 2127-AK64 - Download Full Notice: Text | PDF

This document proposes corrections or minor changes to some of the drawings incorporated by reference by a final rule, published on June 16, 2008, that responded to petitions for reconsideration of a December 2006 final rule that had adopted specifications and qualification requirements for a new crash test dummy called the ``ES- 2re'' test dummy. The ES-2re is a 50th percentile adult male side impact crash test dummy that will be used in an upgraded Federal motor vehicle safety standard on side impact protection and in the agency's New Car Assessment Program. This NPRM responds to requests from test dummy manufacturers First Technology Safety Systems (FTSS) and Denton ATD (Denton) to correct or make minor adjustments to the drawings of the ES-2re. This NPRM would also correct dimensional errors in Figure 22 of 49 CFR part 572, subpart E, which depicts the pendulum used in the neck qualification tests of several of the crash test dummies, including the Hybrid III and ES-2re test dummies.

Agency Contact: For non-legal issues, you may call Mr. Peter Martin, NHTSA Office of Crashworthiness Standards (telephone 202- 366-5668) (fax 202-493-2990). For legal issues, you may call Ms. Deirdre Fujita, NHTSA Office of Chief Counsel (telephone 202-366-2992) (fax 202-366-3820). You may send mail to these officials at the National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590.

This is a proposed regulation. Comments were due on April 6, 2010.





Image 01 Image 02 Image 03 Image 04 Image 05 Image 06 Image 07 Image 08